Dental Automatic Sealing Machine, 90-Degree Fold Large Touch Screen, AutoPrinting And Sealing,Support English and Chinese,Easy to Change Ribbon,Intelligent Belt Printing Sealer With Cutting

Introduction

Range of Application

Sealable material:
1. Bags and bag rolls in accordance with EN868 -5 and YY/T0698-5;
2. Paper bags in accordance with EN868-4 and YY/ T0698-4;
3. High-density polyethylene materials (such as Tyvek);
4. Aluminum foil composite material.

Materials that cannot be sealed:
1. Polyethylene film;
2. Soft PVC film, hard PVC film;
3. Nylon film, polypropylene film.

Versions

Major Characteristic

1.7 "color LCD touch screen, graphical operation interface, Chinese and English display printing switch, keyboard input control, built-in clock,And parameters can be set and have automatic storage function.
2.With positive sequence (descending order) sealing counter, it can realize the sealing number statistics within 0~ 999: with printing margin,Print spacer symbols and other special functions.
3.With rapid heating and auxiliary cooling design: equipped with microcomputer controlled heating and cooling mechanism, reduce the sealing temperature fast，Speed from low to high or from high to low waiting time, high efficiency and energy saving, to meet the needs of fast-paced temperature conversion work.
4.Computer intelligent temperature control design, working temperature 60~220C arbitrary setting, temperature control accuracy is less than 1%; Preset four constants With the temperature, respectively 60℃, 120℃, 180℃, 220℃, can be quickly switched according to the daily needs of users, convenient for users to quickly choose the sealing temperature.
5.The sealing temperature exceeds the working temperature set value range of 4'C, the machine will automatically stop working, effectively ensure the quality of the sealing and safe operation of equipment.
6.Adopts floating constant pressure pressing structure design to meet the sealing needs of three-dimensional bags and paper bags of different thickness.
7. Automatic fault alarm instructions can realize automatic detection of the working process, and various faults can be automatically alerted or prompted.
8.Standby time and standby temperature can be adjusted, intelligent standby recovery, can be restored to the working temperature at high speed, reducing the waiting time.
9.Advanced flat-plate ceramic heating components, fast heating, uniform heating, high temperature resistance, long life, high thermal efficiency.
10.The equipment comes with the operation identification function, which can realize the test time, sealing temperature, pressure, speed, sealing time and operation .Personnel and equipment numbers printed in both Chinese and English.
11.The display can be folded and the Angle can be adjusted.
12.Replace ribbon without turning equipment, replacement is more convenient and fast. This machine is designed as a drawer type ribbon warehouse.

Structure Diagram

Change ribbon：
When the printing content is blurred, it is generally the service life of the ribbon, should be replaced in time, replace the ribbon method: press the right side of the sealer (designated position), pull out the printing component, then press and hold the spring clamp, remove the ribbon, put the new ribbon back into the spring clamp, push the print head left to the original position (automatic locking), hear a click and pull can not move.

Guide plate adjustment：
The guide plate is installed on the left side of the device, and the position of the seal can be adjusted by adjusting the guide plate during sealing. When adjusting, rotate the nut to move the guide plate, move the guide plate outward to make the seal close to the edge of the paper bag, and move the guide plate inward to make the seal away from the edge of the paper bag. The specific adjustment size depends on the sealing condition. After the adjustment, rotate the nut until the guide plate is fixed.

Technical Parameters

1. Ambient temperature: 0℃~40℃;
2. Relative humidity :≤80%;
3. Atmospheric pressure: 80kPa~ 106kPa;
4. Power supply: AC220V 22V, 50Hz±1Hz;
5. Input power: 500W;
6. Storage environment, temperature: -40℃~55℃;
7. Transfer speed of paper: 7.5m/min;
8 The items printed are: sterilization date, expiration date, batch number, operator's name, pot number, pot number, item name, department;
9. Bag width required for printing all options: 124mm (narrow body) ,172mm (normal) ,234mm (wide body);
10. Working temperature: 60~210℃, adjustable temperature accuracy ≤1%
11. Seal edge: 0~35mm
12. Sealing line width: 12mm
13. Printing method: Pin type printing