Products are subject to improvement without prior notice.
Want to place bulk order,but the express shipping is too expensive?
Contact us for lower sea shipping now!
Dental Zirconia Sintering Ceramic Multifunctional Furnace,Fast Zirconia /Glazing Sintering Furnace,Dental Lab Dental Equipment
●Fast sintering of the fully form
●Predrying
●Maximum sintering temperature 1530℃
●Finish glazing in 9 minutes
●Maximum heating speed 200℃/ S
●Ready to use after power on, without 2 hours of preheating
●Active cooling
●Crown restoration 4-10(60mm dianeter tray)
Tips: If the payment amount is more than $5000, you are advised to choose the bank for payment.
- Qty.Range(unit)Price(unit)Discount
- 3$2,450.004%
- 6$2,350.008%
- 11$2,250.0012%
- 16$2,150.0016%
User Manual
Introduction
High Purity Elema Technology！
Fast temperature rise to 1500°C in 20 minutes，The crystallization process takes 40 minutes to an hour！
TR-DLC02 does not simply use 220V mains power to connect silicon carbon rods in series, but reduces voltage to drive, so that the thermal load of silicon carbon rods is greatly reduced and the service life is effectively extended. Moreover, the temperature rise is controlled at 20 minutes as the program limit, which does not mean that the temperature can not be heated up rapidly. At present, even the top silicon carbon rod in Denmark cannot bear the huge thermal load, and the service life of repeated use will be rapidly shortened.
Features：
1.Fast sintering of the fully form
2.Predrying
3.Maximum sintering temperature 1530℃
4.Finish glazing in 9 minutes
5.Maximum heating speed 200℃/ S
6.Ready to use after power on, without 2 hours of preheating
7.Active cooling
8.Crown restoration 4-10(60mm dianeter tray)
Technical Parameters
1.Operation range：100-120V 50/60HZ 230V 50/60HZ
2.Electric current：11. 5A@110V;5.5A@230V
3.Power max:1200w
4.Power unit：Voltage controller,the service life of the silicon elema is effectively prolonged.
5.Voice prompt:Each stage has voice prompt. Program selection prompt to prevent using wrong program.
6.Host Size：27*36*56cm
7.Power Unit Size:29*22*13.5cm
8.Furnace core diameter：6.5cm
Package Included
1.The host*1pc
2.Cooling rack*1pc
3.Crucible*1pc
4.Pan*1pc
5.Manual*1pc
6.Elema*5pcs
7.Power unit*1pc
Installation and Use Instruction
The sintering furnace must be installed in the dry room,and it must be put at least 25cm away from the wall.
A. Take out the sintering furnace core from the accessories for standby(it must be placed in a safe place);
B. Insert the output plug of the power unit into the sintering furnace and the input plug of the power unit into the external plug. (for 220 V instruments only);
C. Turn on the power switch of power unit,then turn on the power switch of
sintering furnace.
D. When the sintering furnace starts and display the main interface(when the temperature is displayed), press the down button, and the sintering platform moves downward (do not place any obstacles on the track of the sintering platform )；
E.Assemble the baking core on the sintering platform.
The output voltage can be controlled to reduce the driving voltage. Effectively prolong the service life of silicon carbide rod. The lower voltage is used to drive the silicon carbide rod to reduce the heat load so the service life of the silicon carbide rod is greatly prolonged. Power unit must be placed in a well ventilated and dry place.
Attention：Never start up the device without baking core!
Operation Panel
①[SINTERING] :Sintering interface.
②[STANDARD]:Standard procedure selection.
③[CUSTOM]:Custom program selection.
④[PROGRAM]:Program parameter setting interface.
⑤[UP]:The tray rises.
⑥[DOWN]:Tray down.
⑦[SET]:Other settings.
Program parameter setting need to enter 11 parameters in sequence to complete the setting：
（Please read the instruction manual for details）
1.Pre drying temperature
2.Pre drying time
3.Temperature rate of the first temperature curve
4.Maximum temperature of the first temperature curve
5.High temperature holding time of the first temperature curve
6.Temperature rate of the second temperature curve
7.Maximum temperature of the second temperature curve
8.High temperature holding time of the second temperature curve
9.Cooling time
10.Opening temperature of furnace door
11.File name
| Manufacturer | TREE |
|---|---|
| Power Input | 220V,50Hz |
| Power | - |
| Package Size | 1.Package1(The host):45*40*65cm； 2.Package2(Power Unit):40*32*31cm |
| Package Gross Weight | 1.Package1(The host):28kg 2.Package2(Power Unit):12kg |
Warranty
1. All the items at TREEDENTAL store are covered with a warranty. The warranty period is indicated in each item's description.
2. Warranty covers a replacement or repair of the faulty item. Contact us immediately for any issue that might happen to our product within the warranty period which is not man-made. You simply need to fill in the TREEDENTAL International Warranty Form here.
3. Within the warranty period, TREEDENTAL store will be responsible for covering the fee of the new spare parts and their shipping cost into your destination. If the faulty item needs to be sent back to our store for checking and repair, then we will cover the fee of shipping it back to our store. Upon its arrival to our store, we will cover the fee of the repair and ship it back to your doorstep for free also.
4. If your purchased item is out of the warranty period, then you can report the issue to us into [email protected] and our technical support team will issue you a report for the repair fee based on the kind of the fault.
5. Replacement: In case the product received comes with manufacturing defects, the buyers are entitled to request a product replacement within 7 days of receiving the item. To request a replacement, the buyers are required to provide photographic as well as video evidence of the product’s manufacturing defects which can be sent to our email: [email protected]. If the case is deemed valid, then we will cover the related cost to deliver a replacement.
The price displaying on website is factory price only, not including any shipping cost, your country’s import tax, customs clearance fee and insurance.
Shipping Cost
We can ship out the goods to you by three ways: Express ( DHL/UPS/FeDex/EMS), Air Shipping or Sea Shipping.
Express is the better way for order which the weight is under 10KG, it normally takes 4-7 days for delivery and delivery to your door directly.
Air Shipping is a good way for heavy order more than 100kg if you need the order urgently. It normally takes 7-10 days for delivery. But you need to do the customs clearance at your airport and pick the goods up there.
Sea Shipping is the lowest-cost way for big order, such as dental chair/dental unit order. It normally takes 30-60 days for delivery. But you need to do the customs clearance at your seaport and pick the goods up there.
The shipping cost which we charge you when you do the Checkout on our website is just for the Express shipping cost, if you want to use a cheaper shipping way, such as Sea Shipping, you need to contact us for the quote.
For the Air Shipping and Sea Shipping, if you don’t want to take the trouble to do the customs clearance and just want goods delivery to your door, we also can do that for you in additional charge.
Import Tax
Different country will have different import tax rate for different items, some country even 0 import tax for dental equipment. So if you want to know the exact import tax rate of the products, you need to inquire your customs department. Our price is not including any import tax, you need to pay it to your customs when the package arrive your country. But you can inform us to make a low value shipping invoice for you to avoid high import tax.
Shipping Insurance
Shipping insurance covers any damage or missing for your order during the transportation, so we highly recommend you to buy it for your large amount order. The insurance premium are as follows:
a.For Express/Air Shipping/Sea Shipping, the insurance premium= the sum insured*1.1*0.0008, minimum insurance premium for each bill is USD 30.
b.For Air Shipping or Sea Shipping with door to door delivery service, the insurance premium= the sum insured*1.1*0.0013, minimum insurance premium for each bill is USD 30.
c.Deductible: USD300 or 0.5% of the sum insured of the whole consignment, whichever is higher.
If you want to buy the shipping insurance for your order, you can buy it together with your order here: Cargo Transportation Insurance,PICC
Let’s take an example for these three different shipping ways (Just for reference):
One set of R7 dental chair shipped to Toronto, Canada.
Package Size： 147*110*153CM
Package Gross Weight：285KG
The value on shipping invoice: USD$4980
|
Shipping Ways |
Shipping Cost You Paid to Treedental (USD$) |
import tax (USD$)(For Canada, no duty but 5% GST) |
customs clearance fee(USD$) |
Delivery charge from airport/seaport to your door(USD$) |
Insurance(USD$) |
Total(USD$) |
| Express (DHL/UPS/FeDex/EMS) |
3630 | 250 | 0 | 0 | 30 | 3910 |
| Air Shipping | 2020 | 250 | 193 | 230 | 30 | 2723 |
| Sea Shipping | 500 | 250 | 193 | 230 | 30 | 1203 |
1 set and 5 stes of R7 dental chair shipped to New York, United States.
Package Size： 147*110*153CM/SET
Package Gross Weight：285KG/SET
The value on shipping invoice: USD$4980/SET
Shipping Ways |
Shipping Cost You Paid to Treedental (USD$) |
import tax (USD$) |
Custom Duty(includ ISF)(USD$) |
Seaport Local Charge (USD$) |
Warehouse fee (USD$) |
Delivery charge from airport/ seaport to your door (USD$) |
Customs Clearance Fee (USD$) |
Total (USD$) |
|
Express (DHL/UPS/FeDex/EMS) 1 set |
3180 (From factory to your door) | 50 | 0 | 0 | 0 | 0 | 0 | 3230 |
|
Express (DHL/UPS/FeDex/EMS) 5 sets |
15900 (From factory to your door) | 250 | 0 | 0 | 0 | 0 | 0 | 16150 |
| Air Shipping 1 set | 2310 (From factory to your airport) | 50 | 0 | 0 | 0 | 0 | 0 | 2360 |
| Air Shipping 5 sets | 11550 (From factory to your airport) | 250 | 0 | 0 | 0 | 0 | 0 | 11800 |
| Sea Shipping 1 set | 450 (From factory to your seaport) | 50 | 185 | 300 | 415 | 450 | 125 | 1925 |
| Sea Shipping 5 sets | 545 (From factory to your seaport) | 250 | 260 | 715 | 535 | 900 | 125 | 3330 |
Customers rate us 5.0/5 based on 1000+ reviews.