Products are subject to improvement without prior notice.
Want to place bulk order,but the express shipping is too expensive?
Contact us for lower sea shipping now!
High Frequency Full Automatic Electrotome Electron Surgical Unit Dental Cutting Unit,For Cutting and Hemostasis of Soft Tissue in Oral Surgery,CE Approved
●High safety:Full automatic powercontrol system,no need neutraleletrode;
●Efficient andconvenient:Frequency reachesup to 27MHz
●Especially suitable forclinical surgeryL:Meet the ergonomics design
●Suitable for cutting and hemostasis of soft tissue in oral surgery
●CE Approved
Tips: If the payment amount is more than $5000, you are advised to choose the bank for payment.
- Qty.Range(unit)Price(unit)Discount
- 3$1,490.001%
- 6$1,480.001%
- 11$1,470.002%
- 16$1,460.003%
User Manual
Working Principle&Application
The high frequency electrosurgical unit is made by utilization of heat effect produced by high frequencycurrent through engine body. When high frequency electricity is cutting, needle or blade electrode should beused normally, effective area is small, but electric current density of issue under electrode is big, therefore, itproduces lots of heat in one moment time, and evaporates the issue under electrode explosivelv, and disruptsone non-bleedina, narrow and flat, few millimeters incision, coaaulates blood in blood vessel to certain depth.instead of ligation,and finish incision hemostasis.It is suitable for cutting and hemostasis of soft tissue in oral surgery.
Due to high frequency electrome can cut and coaqulate blood at the same time, it can be widelyused in operations which mechanical scalpel can not be used, such as in abdomen ligation, prostatic urethraresection, The outstandina coaaulation ettect o high freauency electrome make it can be widelv usedin diffuse bleeding site, such as liver, spleen, thyroid, breast, and lung operations.
General Description
High frequency unit(TR-DCU02) is comprised of control box, surgical electrode(needle-, loop- and ball-typed), handpiece, handpiece cord, mains power cord, etc., as depicted in the following figure.
1.Mode switch panel
2.Control box
3.Mains power cord
4.Handpiece cord
5.Handpiece holder
6.Handpiece, detachable
7.ON/OFF finger switch for instrument activation
8.Instrument socket
9. Holder casing(Seven electrodes)
10.Seven instruments in holder casing
11.Green lamp
12.Blue lamp(COAG)
13.Orange lamp(CUT)
14.Handpiece cord connector
15.Warning symbol(see chapter N)
16.Mains power inlet
17.Main ON/OFF switch
18.Fuse
Features
1.Fast speed cutting, good hemostasis effect, simple operation, safe and convenient.The simple and portable design can reduce the discomfort and anxiety of patients.
2.Compared with traditional mechanical scalpel, it can shorten operation time clinically, reduce bleedingvolume and blood transfusion volume, to reduce rate of complication and surgery cost.
3.Compared with other surical instruments, such as laser knife, microwave knife, ultrasound knife, wateiscalpel, semiconductor hot coagulation scalpel, it has wider range of application, lt is easy to entersurgery spot, can operate simply, and has high cost-performance ratio.
Seven Electrodes
|
1 |
|
Needle (For cutting) |
Straight |
Straight wire,thin |
|
2 |
|
Loop (For cutting) |
Straight |
Circular wire.diam.5mm |
|
3 |
|
Ball (For coagulation) |
Straight |
Ball,diam.3mm |
|
4 |
|
Needle (For cutting) |
Straight |
Straight wire,heavy |
|
5 |
|
Needle (For cutting) |
Angled |
Angled wire.heavy |
|
6 |
|
Needle (For cutting) |
Angled |
Angled wire,thin |
|
7 |
|
Needle (For cutting) |
Straight |
Circular wire,diam.10mm |
Technical Specifications
1.Mains voltage: AC 220V/50 Hz
2.Primary fuses:T1A,AC 250V
3.Operating frequency:27.126 MHz
4.Rated maximum output power:
●Coagulation mode:＜50W at non-inductive load impedance of 500 ohms
●Cutting mode: ＜25W at non-inductive load impedance of 500 ohms
5.Maximum power consumption:150 VA
6.Control box dimension;272×190×62.5mm
Operation Control
A. Mode Switch Panel
Press the power button to - side at the rear of the control box, and the green lamp is on.
Finger touch-switches:
1. Coagulation Mode: Blue lamp is on or off
-When blue lamp is ON it represents that the device is under the coagulation mode with handpiece ready to operate.
-When blue lamp is OFF it represents that the device is under the standby mode with handpiece inoperative.
2.CUTTING Mode: Yellow lamp is on or off
- When yellow lamp is ON it represents that the device is under the cutting mode with handpiece ready to operate.
-When yellow lamp is OFF it represents that the device is under the standby mode with handpiece inoperative.
B. Control Box ON/OFF
ON: Press the handpiece finger switch button (press and hold the rubber ring between fingers).OFF: Release the handpiece finger switch button.
| Manufacturer | TREE |
|---|---|
| Products Category | Electrosurgery Dental Cutting Unit |
| Package Size | 49*19*38 CM |
| Package Gross Weight | 4.4kg |
Warranty
1. All the items at TREEDENTAL store are covered with a warranty. The warranty period is indicated in each item's description.
2. Warranty covers a replacement or repair of the faulty item. Contact us immediately for any issue that might happen to our product within the warranty period which is not man-made. You simply need to fill in the TREEDENTAL International Warranty Form here.
3. Within the warranty period, TREEDENTAL store will be responsible for covering the fee of the new spare parts and their shipping cost into your destination. If the faulty item needs to be sent back to our store for checking and repair, then we will cover the fee of shipping it back to our store. Upon its arrival to our store, we will cover the fee of the repair and ship it back to your doorstep for free also.
4. If your purchased item is out of the warranty period, then you can report the issue to us into [email protected] and our technical support team will issue you a report for the repair fee based on the kind of the fault.
5. Replacement: In case the product received comes with manufacturing defects, the buyers are entitled to request a product replacement within 7 days of receiving the item. To request a replacement, the buyers are required to provide photographic as well as video evidence of the product’s manufacturing defects which can be sent to our email: [email protected]. If the case is deemed valid, then we will cover the related cost to deliver a replacement.
The price displaying on website is factory price only, not including any shipping cost, your country’s import tax, customs clearance fee and insurance.
Shipping Cost
We can ship out the goods to you by three ways: Express ( DHL/UPS/FeDex/EMS), Air Shipping or Sea Shipping.
Express is the better way for order which the weight is under 10KG, it normally takes 4-7 days for delivery and delivery to your door directly.
Air Shipping is a good way for heavy order more than 100kg if you need the order urgently. It normally takes 7-10 days for delivery. But you need to do the customs clearance at your airport and pick the goods up there.
Sea Shipping is the lowest-cost way for big order, such as dental chair/dental unit order. It normally takes 30-60 days for delivery. But you need to do the customs clearance at your seaport and pick the goods up there.
The shipping cost which we charge you when you do the Checkout on our website is just for the Express shipping cost, if you want to use a cheaper shipping way, such as Sea Shipping, you need to contact us for the quote.
For the Air Shipping and Sea Shipping, if you don’t want to take the trouble to do the customs clearance and just want goods delivery to your door, we also can do that for you in additional charge.
Import Tax
Different country will have different import tax rate for different items, some country even 0 import tax for dental equipment. So if you want to know the exact import tax rate of the products, you need to inquire your customs department. Our price is not including any import tax, you need to pay it to your customs when the package arrive your country. But you can inform us to make a low value shipping invoice for you to avoid high import tax.
Shipping Insurance
Shipping insurance covers any damage or missing for your order during the transportation, so we highly recommend you to buy it for your large amount order. The insurance premium are as follows:
a.For Express/Air Shipping/Sea Shipping, the insurance premium= the sum insured*1.1*0.0008, minimum insurance premium for each bill is USD 30.
b.For Air Shipping or Sea Shipping with door to door delivery service, the insurance premium= the sum insured*1.1*0.0013, minimum insurance premium for each bill is USD 30.
c.Deductible: USD300 or 0.5% of the sum insured of the whole consignment, whichever is higher.
If you want to buy the shipping insurance for your order, you can buy it together with your order here: Cargo Transportation Insurance,PICC
Let’s take an example for these three different shipping ways (Just for reference):
One set of R7 dental chair shipped to Toronto, Canada.
Package Size： 147*110*153CM
Package Gross Weight：285KG
The value on shipping invoice: USD$4980
|
Shipping Ways |
Shipping Cost You Paid to Treedental (USD$) |
import tax (USD$)(For Canada, no duty but 5% GST) |
customs clearance fee(USD$) |
Delivery charge from airport/seaport to your door(USD$) |
Insurance(USD$) |
Total(USD$) |
| Express (DHL/UPS/FeDex/EMS) |
3630 | 250 | 0 | 0 | 30 | 3910 |
| Air Shipping | 2020 | 250 | 193 | 230 | 30 | 2723 |
| Sea Shipping | 500 | 250 | 193 | 230 | 30 | 1203 |
1 set and 5 stes of R7 dental chair shipped to New York, United States.
Package Size： 147*110*153CM/SET
Package Gross Weight：285KG/SET
The value on shipping invoice: USD$4980/SET
Shipping Ways |
Shipping Cost You Paid to Treedental (USD$) |
import tax (USD$) |
Custom Duty(includ ISF)(USD$) |
Seaport Local Charge (USD$) |
Warehouse fee (USD$) |
Delivery charge from airport/ seaport to your door (USD$) |
Customs Clearance Fee (USD$) |
Total (USD$) |
|
Express (DHL/UPS/FeDex/EMS) 1 set |
3180 (From factory to your door) | 50 | 0 | 0 | 0 | 0 | 0 | 3230 |
|
Express (DHL/UPS/FeDex/EMS) 5 sets |
15900 (From factory to your door) | 250 | 0 | 0 | 0 | 0 | 0 | 16150 |
| Air Shipping 1 set | 2310 (From factory to your airport) | 50 | 0 | 0 | 0 | 0 | 0 | 2360 |
| Air Shipping 5 sets | 11550 (From factory to your airport) | 250 | 0 | 0 | 0 | 0 | 0 | 11800 |
| Sea Shipping 1 set | 450 (From factory to your seaport) | 50 | 185 | 300 | 415 | 450 | 125 | 1925 |
| Sea Shipping 5 sets | 545 (From factory to your seaport) | 250 | 260 | 715 | 535 | 900 | 125 | 3330 |
Customers rate us 5.0/5 based on 1000+ reviews.