Product Question Answer

1. Suction--Filter--Disinfection.

2. When you open the Dental External Oral Suction, it can effectively capture the aerosol emerging from the mouth of the patient consists of splashes of the spray mist rebound and droplets containing cooling water, saliva, blood, microorganisms, bacterias, and viruses. This mixture presents a high risk of infection.

3. The gas from the dental external oral suction pass the primary HEPA + activated carbon will be filtered out the particle larger more than 5 μm .

4. The gas from the primary HEPA + activated carbon pass the secondary HEPA + activated carbon will be filtered out the particle larger more than 0.3 μm .

5. Filtering efficiency is as high as 99.9%.

6. The filtered gas then through built-in UV light and plasma disinfection sterilization, after it becomes a clean gas, it will be expelled from the Dental External Oral Suction.

1. Voltage: AC110V-AC240V, 50HZ/ 60HZ
2. Rated power: 1000W
3. Control mode: touch screen/ two gears adjustable
4. Suction flow: 4000L/min
5. Filtration efficiency: (0.3 μm) 99.9%
6. UV intensity（Distance=1M): 1210μw /cm2
7. UV wavelength : 254nm
8. UV light working life: 10000 hours
9. Plasma sterilization working life: 6000 hours
10. Features: UV-C Irradiation+Plasma sterilization
11. Noise: ≤60 dB
12. Pressure: -25Kpa
13. Product size: 32*33*75.5 cm (without arm)

Upgraded Wide-mouth suction hood

1. The upgraded suction hood is better to fit the shape of the patient's face while being friendly to the doctor's operation.
2. The upgraded suction hood add an air intake filter to prevent larger particles from being sucked into the machine body.
3. Natural fluid modeling combined with strong suction power, more smooth formation of negative pressure drainage to ensure the suction effect. The suction efficiency can reach 97%.
4. The optimal distance from the suction hood to the Patient's mouth is 10-15 cm.

Segmented rotary arm

1. Grips that can adjust your desired position is removable, you may adjust direction freely. There are fixing bolts on the upgraded suction hood and fixing bolts on the first suction arm. Easier to install, no auxiliary tools required. User-friendly, more stable and not falling.
2. The arm should be used in the same direction as the arrow.
3. Outer diameter of the arm is 500 mm, inter diameter of the arm is 480 mm.

Touch control operation panel

Intelligent CNC panel, full touch buttons, you can adjust the working output power with only just one click; digital dial displays operating conditions, it is easy and convenient.

Efficient filtration

1) Two sets of activated Carbon + HEPA high precision Filter, filtration efficiency up to 99.9%.
2) HEPA high precision Filter is recommended to replace it once a year.

DC motor without brush

1. Power: 1000W.
2. Noise: ≤60 dB.
3. Pressure: -25Kpa

UV-C disinfection lamp

1. Power: 6w.
2. Features: Disinfection and sterilization.
3. Wavelength: 254nm.
4.UV intensity (Distance=1M): 1210μw /cm2.

Plasma disinfection sterilization

The instantaneous positive and negative ions generated by the plasma disinfection sterilization generate a huge amount of energy release at the moment of neutralization of positive and negative charges in the air, resulting in the change of the structure of the surrounding bacteria or the conversion of energy, which causes the death of the bacteria and realizes its sterilization . Because the number of negative ions is greater than the number of positive ions, excess negative ions are still floating in the air, which can achieve smoke elimination, dust removal, odor elimination, and improved air quality to promote human health.

Wheel

Brake pulley design, easy to move and fix.

Handle

Convenient to move at any time.