Product Question Answer
User Manual
Introduction
●It is a professional and painless local anesthesia device for oral cavity, which is applied for all diagnosis offices of stomatology department, and is appropriate for local infiltration anesthesia during the treatments of oral diseases, such as intraoral cure, repair, reform, small size of surgical operation and so on while combined with Primacaine, Scandonest and other major anesthetics for oral cavity.
●This instrument adopts technologies of advanced rotation needle, steady flow velocity , manufacture of narcotic passageway, and so on ,thus there can be no pain throughout the entire treatment . Unique design and easy way of injection make the operation easier. So it makes patients reduce fear, pain and anxiety, at the same time, reduces the doctors' pressure.
Function Description:
1. The start button can be gently pressed, index finger or thumb press is not necessary, it can be
work by touch by any part of your hand!
2. Three levels of speed optional( High, medium and slow ): High speed about 90 seconds /1.8ml,
medium speed about 180 seconds /1.8ml, and slow speed about 360 seconds /1.8ml.
3. The indicator light is green when it works normally. When the push rod is pushed to the end
point, it will show red light. Red light flash when the machine needs charging.
Features
1. Automatic deliver, uniform anesthetic delivery; suitable for intraligamental and infiltration anesthesia.
2. Perfectly combine the needle-holding with the one-click operation, matched with the
doctors' habits.
3. Three-speed level optional ; No foot pedal ; One-click operation.
4. The center of gravity is at the wrist , make it more stabilize when the needle pierce
the skin.
5. Small size , light weight and easy to carry.
5. Standby time of built-in rechargeable lithium battery is more than one month.
6. Compatible with 1.8 ml cartridge anesthetic.
7. Compatible with both inch and metric thread needle.
8. No pipeline and other consumables to save the cost and reduce anesthetic waste.
Standard Components
Technical Parameters
1.Working environment: equipment is suitable for the common environment places
2.Power adapter input: AC 100-240V 50/60Hz output: 12VDC
3.Work power: in-built Lithium battery
4.Standby time: 30 days
5.Working time: a sufficient electricity, continuous working time more than 200 minutes
6.Speed output: high/medium/low three gears, Low-speed: about 360 seconds/1.8ml, Medium speed: about 180 seconds/1.8ml, High-speed: about 108 seconds/1.8ml
7.Work instructions: LED green lights
8.Alarm instructions: LED red flashes
Operational Approach
Step 1.Install the anesthetic cartridge
1.Please install the cartridge anesthesia (such as scandonest, primacaine ) into the booster tube;
2.There are two pieces booster tubes in standard pack (1 metric system and 1 inch system).
Step 2.Install a needle
Compatible with inch and metric system needles.
Step 3.Install the booster tube to the main engine
1. Pull the quick plug backward with index finger, insert the boost tube into the bottom of the quick plug, and loosen the index finger and make sure it is locked;
2. The push rod won’t move forward by press the start button when the machine have not install the booster tube .
Step 4.Debug the machine
1.Set the speed, then press the start button , prepared well once you can see the anesthetic come out;
2. The Low speed is recommended for periodontal ligament anesthesia, so that the patient will feel less pain during injection.
Step 5.Method of hold the machine(Choose the comfort holding method as you like.)
Press the switch with your Thumb
Step 5.Method of hold the machine(Choose the comfort holding method as you like.)
Press the switch with your index finger
Step 6.Clinical example diagram 1
Oral injection pressed by index finger
Step 6.Clinical example diagram 2
Step 6.Clinical example diagram 3
Oral injection pressed by thumb
Step 7.Remove the booster tube
Remove the booster tube by pull the quick plug backward with index finger.
Step 8.Charging
1. When charging, please pay attention to the correct placement as shown in the figure to ensure the correct place between the host and the base.
2. The charging indicator will show green when the base is connected to the power supply, red light after sitting on the charging base and charging, and green light after finish charging .
Step 9.When not charging, The machine and charging base are placed as the picture above
1. The battery can achieve best working condition after 3-4 times charge and discharge ,the machine should be charged for 4hours for the first time.
2. If it is not used for a long time, it is recommended to retain the battery with a certain amount of electricity.
Attention
1.This product is only applicable to the boost of local anesthesia in the department of stomatology.
The choice of anesthetics and needles shall be purchased separately according to the clinical needs
of doctors.
All the consequences caused by improper selection of anesthetics and needles have nothing to do
with this product.
2. The machine should be disinfected after use.
It is recommended to spray the disinfectant onto a clean paper towel to wipe the machine. Do not
spray the disinfectant directly onto the machine. The booster tube can be disinfected by 134 ℃ high temperature and press .
3.The storage products warehouse environment temperature for - 10 ℃ to + 45 ℃ of indoor cleaning,to avoid contact with corrosive substances, stay away from fire and heat source.
4. Please keep away from strong magnetic field and alternating current equipment to avoid
electromagnetic interference.
5.During transportation and using, the product shall be protected from violent vibration, drop, impact or extrusion.
6.If the product reaches the scrapping period, the machine and accessories shall be disposed in
accordance with relevant national regulations.
Customers rate us 5.0/5 based on 1000+ reviews.