Product Question Answer

User Manual

Product Introduction

1.Dental turbine is made up of imported parts in response to the needs of customers.Than manufacture of it combines with foreign advanced theory of equipment control theory.
2.The handpiece interface common interface generally used in the world .the use of advanced design principle makes it can connect with different external pieces according to different demands .
3.It is very reliable ,affordable and is an idea tool for the treatment .

Versions

How to use

1. Link
Connect the gas source with fast interface ; connect water with files . According to different requirements ,connect it with external accessories and equipments .Turn on water vapor switch .after work ,shut off the gas source.
2. Use
1) Connect it with hignt-speed handpiece ,adjust pneumatic to 0.2,adjust conditioning cooling water to be like frost when the handpiece works.
2) Linking sandblasting guns adjust pneumatic to 0.3,proper amount of water is suitable, After using ,first shut off the sandblasting guns ,then stop it .
3) Connect it with the scaler adjust pneumatic ti 0.3 ahjust the amount of water to make the scaler viberate.
4) Connecting low-speed handpiece ,the greatest pressure regulator can operate ,aircraft control valve system has been adjusted by 0.4 .
User need not to use machine whose air pressure is higher than 0.3.

Standard Accessories

1.High speed air turbine Handpiece tube 1pc.
2.Low speed air turbine Handpiece tube 1 pc.
3.3-way air/water syringe 1pc.
4.Clean water bottle 600ML 1set.
5.Foot pedal 1set.
6.Dental turbine unit 1set.
7.Plastic tube for connection to air compressor 1pc.
note: it does not include the compressor

Specification

1.Water pressure: 0.1Mpa~0.25Mpa.
2.Air pressure for handpiece: 0.01Mpa~0.4Mpa.
3.Just connect to air compressor (0.4Mpa~0.8Mpa required) to get start