Product Question Answer

User Manual

Working Procedures:

This machine can clean and oil the parallel shank or bending handpiece accurately and easily at any time.

It have the character of high security, easily operating.

Three dental handpieces can be oiled and cleaned at the same time.

Swing pinion can effectively clean and oil the dental handpiece from different angles.

Having completed the procedure of the cleaning and oiling,the remained oil can be cleared by pressing the air key.

Different handpieces can be oiled by choosing the short mode. The long mode, and the extra-long mode.

NO INCLUDING WITH HANDPIECE

Working Procedures:

Put the handpieces into the machine. 

Close the door. 

You can setting the time, with three time model (Short, Long, Extra-long). 

Push the “Start” button.

Specification:

1.The use of dental handpiece can improve the maintenance drive 40 percent of life.

2.Rated Voltage: AC120V-230V 50HZ/60Hz 

3.Air Pressure: 0.35~O.60Mpa (3.5~6.0kgf/cm2)(50~85psi) 

4.Can Volume: 350mL 

5.Overall Dimension: 280mm×360mm×275mm 

6.Net Weigh: 6.8kg(no including with packaging)

7.The economic benefits of high-speed fill lubricants can be maintained after 3000 about the dental handpiece. (Recommend the use of numbered more than 1.2 million high-speed lubricants) 

8.A simple operation, everyone can operate it. 

9.Have a professional gas filter. 

10.Filling the tank can be simple, level must View.

Mode:

INCLUDING WITH:

1 New Automatic Dental handpiece maintenance system/lubricating device (no including with handpiece)

1 Operation manual