Product Question Answer
Versions
TR-H16-1 With Lamp and Tray
TR-H16-2 With Lamp,Tray and Plastics Spittoon
TR-H16-3 With Lamp,Tray , Plastics Spittoon and Turbine Unit
（Handpiece Connection can choose 4 hole or 2 hole）
TR-H16-4 Single Chair
Colors
Blue
Green
Features and Configurations
●Chair height above ground: 40-57cm (adjustable for 5 levels)
●Backrest tilt Angle: 105-170 °
●Designed with hole on both the chair's left and right sides
●The leather cushion of the chair:PU cushion
●Chair provides a huge weight capacity(135kg)
●LED lamp voltage: 220V
●LED lamp power: 5 w
●Lamp arm rotation Angle: 360° free rotation
●Plastics spittoon has two taps, the high one for water supply and the low one for flushing
●About the portable turbine unit:
1.Voltage: 110-240V
2.Turbine unit 1set
3.Turbine Handpiece tube 2pcs(4 hole or 2hole optional)
4.3-way air/water syringe 1pc
5.Clean water bottle 1set
6.Foot pedal 1set
7.Saliva Ejector 1set
8.Water and air plastic pipe 1set
Installation instructions
Installation tips:
1.The left and right sides of the folding chair are designed with hole.
2.The turbine and lamp holder can be swapped left and right at will.
3.The turbine and lamp holder can also be hung on the side at the same time.
①Put the chair up,As shown,just pull it back and forth.
②Insert the support post behind the back into the seatthe positioning hole behind.(Pin adjustable angle).
③Stick the headrest strap to the backside.(Adjustable height).
④Insert the light holder into the hole behind the armrest.(Both left and right).
⑤To install the sputum, the water pipe must first be removed from the Pass through the hole position.
⑥Installing sprinklers.
⑦Install the tray.
⑧Connect the power cord.
⑨Mount the S-bracket on the armrest;The hole position at the back (both left and right).
⑩Face position alignment bracket after turbinescrews,hang them on the stand.
⑪Install the foot fixing plate.
⑫Water pipes connecting turbines(Left intake pipe,lower sewage pipe).
Accessories Display
TR-H16-1 (With Lamp and Tray) -Accessories
Backrest headrest
LED lamp
Foot fixing plate
The tray support
The tray
The connection plug of the lamp
Screw used for fastening
Chair(PU cushion)
Customers rate us 5.0/5 based on 1000+ reviews.